|
|
Post by limby2000 on Mar 10, 2016 18:22:43 GMT
As listing say,s i,m after the rubber boot/plug fitted to the front gearbox cover on the later 1275 auto that has the park function, or direct me where I can buy a new compatible plug which will fit.
|
|
|
|
Post by mra-minis on Mar 25, 2016 11:50:21 GMT
Please note until I can purchase the MRA-Minis URL I can be contacted on martin@kmprecisionengineering.com
Did you find one ?
I have some 2nd hand ones
|
|
|
|
Post by limby2000 on Mar 25, 2016 16:01:36 GMT
Nope, it seems their rocking horse poo!, I don't suppose you have one laying in the top of your toolbox Martin?. Also after fitting back together the 1275 box, I've notice that its missing a blanking bung on the valve block on the right hand side looking from the front, whereas the 2x 998,s have this fitted. Was the bung down away with on later boxes?.
|
|
|
|
Post by limby2000 on Mar 25, 2016 16:02:57 GMT
I,ll have 1x how much posted. Sorry did,nt read before I replied.
|
|
|
|
Post by mra-minis on Mar 25, 2016 17:02:55 GMT
I can be contacted on martin@kmprecisionengineering.com
PM sent
|
|
|
|
Post by mra-minis on Mar 25, 2016 17:06:38 GMT
I,ll have 1x how much posted. Sorry did,nt read before I replied. scratching my head..... which bung ? |
|
|
|
Post by limby2000 on Mar 25, 2016 18:56:26 GMT
The valve body has a rubber bung/ plug thats on the right hand side, you have to remove the top right hand bolt that comes out to release the bung as its shaped to go round the bolt. Just could,nt understand why the 998,s had it and the later 1275 box did,nt, maybe it was a cost saver. I have transfered it over from the 998 just to be safe.
|
|
|
|
Post by limby2000 on Apr 16, 2016 9:21:51 GMT
Still after this plug connector, its a double bullet connection, probably made by lucas, perhaps its fitted on other type of installation.
|
|
|
|
Post by Stu on May 9, 2016 19:48:32 GMT
Hi Terry, I have some spare 1275 bits. Can you post a pic of what you need and I'll see if I have one, unless Martins already on the case?
|
|
|
|
Post by mra-minis on May 9, 2016 19:56:06 GMT
I can be contacted on martin@kmprecisionengineering.com
If you have one Stu then be my guest, as Terry needs one, I just haven't been able to dig to the back of my unit yet, but I do have them once I get that far back.
|
|
|
|
Post by limby2000 on May 10, 2016 20:11:25 GMT
Hi Terry, I have some spare 1275 bits. Can you post a pic of what you need and I'll see if I have one, unless Martins already on the case? Yeah its the rubber plug/boot that connects to the 2 pin lucas immobilser switch on front cover of gearbox, as fitted to 1275 box with park function. Last resort is to make up a couple of bullet connectors. Attachments:
|
|
|
|
Post by mra-minis on May 10, 2016 21:11:25 GMT
I can be contacted on martin@kmprecisionengineering.com
Do you know how long it took my tired brain to "find" the correct word ? b***y ages, it's inhibitor :-)
|
|
|
|
Post by Stu on May 11, 2016 22:20:20 GMT
Terry, Is this what you're after?   |
|
|
|
Post by limby2000 on May 14, 2016 12:24:27 GMT
Pm,ed
|
|
|
|
Post by mra-minis on May 15, 2016 18:54:31 GMT
Terry, Is this what you're after? Right that's it Stu's off my Christmas list  well done mate you found one, hopefully Terry will be a "happy bunny"  |
|
|
|
Post by Stu on May 15, 2016 20:01:01 GMT
No worries Martin. All in it together to keep our AP Autos on the road and all that With my resto it might be a couple or three years till my auto's seeing tarmac though  |
|
well done mate you found one, hopefully Terry will be a "happy bunny" 
