|
|
Post by 998automan on Apr 12, 2016 18:12:46 GMT
Hi, I am changing some of the 1/4" fuel hoses at the moment & wondered what sort of clips people found worked best. I read a lot about using `proper` fuel hose clips but these never seem to go tight enough to me so I usually use a small worm drive clip (not Jubilee as I have found these to be some of the worst out there!) Does anyone have any recommendations?
|
|
|
|
Post by notamini on Apr 13, 2016 16:14:13 GMT
I have been told that the spring wire type, name escapes me, are best. That's because they are constantly adjusting. So when the hose relaxes or ages, the clamp stays tight. Jubilee types need continuous checking over time because they relax and stretch.
|
|
|
|
Post by 998automan on Apr 13, 2016 16:34:55 GMT
Thanks, I had started looking at these too & found that some suppliers recommend them for fuel hoses & some don`t - typical! So I have ordered a bunch of different types with the intention of doing my own tests. Will let you know how I get on.
|
|
