|
Post by zerot on May 4, 2016 10:06:16 GMT
I need to order a new filter for my '92, pretty sure this is the right filter ?
But what about the bolt seal that I rea so much about leaking, which seal is it that I also need to order?
|
|
|
Post by jockduck on May 5, 2016 11:57:04 GMT
I can't remember the last time I fitted a new "bolt" seal I just keep using the old one and I don't have any leaks, the issues are with the bowl deforming through overtightning, I think its possible that the later bowls are less stiff than the early ones, The seal you want is the LH one which looks more like an "O" ring. Jock
|
|
|
Post by zerot on Aug 31, 2016 17:27:24 GMT
This is where I'm getting my leak, under this bolt head. I'm going to change the filter in a fortnight so want to make sure the leak doesn't return
|
|
|
Post by mra-minis on Mar 28, 2017 7:54:41 GMT
This is where I'm getting my leak, under this bolt head. I'm going to change the filter in a fortnight so want to make sure the leak doesn't return I have these seals available for anyone who wants them, they should be changed every time you change the other seal as the rubber gets hard and then this is what deforms the filter canister, and then leaks. Its progressive, bit by bit it deforms the end till it cannot seal any longer.
|
|