|
Post by limby2000 on Oct 23, 2020 21:47:31 GMT
Has anyone on here fitted an oil cooler to a round nose mini,what cooler did you fit, ive got several and cant seem to find any i can squeeze in.
|
|
|
Post by notamini on Oct 26, 2020 14:22:56 GMT
Did you check one from a Metro?
|
|
|
Post by limby2000 on Oct 28, 2020 6:11:01 GMT
Yep, i have 3 different Metro coolers, 1 from metro turbo, 1 from auto metro and 1 from rover 100 (metro) auto. There just is,nt the space with the round front. Perhaps if i remove the plastic underbody air duct and move the horn. The metro hoses are twice the length too.
|
|
|
Post by mra-minis on Nov 3, 2020 16:54:23 GMT
Yep, i have 3 different Metro coolers, 1 from metro turbo, 1 from auto metro and 1 from rover 100 (metro) auto. There just is,nt the space with the round front. Perhaps if i remove the plastic underbody air duct and move the horn. The metro hoses are twice the length too. Normally just on top of the subframe and use a 9 row cooler... on my turbo I had to fit it under the bonnet inline with the transfer housing but that was due to having a front mounted radiator.
|
|
|
Post by limby2000 on Nov 22, 2020 21:41:35 GMT
I,m currently side tracked with my pressure issue, managed to source a new prv seat, gotta get the old one out, (which ive had out previously) cant remember what thread it was to screw into it. Sure i used a slide hammer to pull it out.
|
|