|
Post by charliezminiz on Dec 14, 2009 15:35:52 GMT
hi, im after a piccy or 2 of how the gear selector cable connects to the gearbox under the torque converter housing. i no roughly just need a couple pics. cheers all.
|
|
|
Post by Admin/Founder 2 on Dec 14, 2009 16:31:57 GMT
Dont know if this is what your looking for but hope these help?
|
|
|
Post by charliezminiz on Dec 14, 2009 17:29:40 GMT
yeah that helps a bit, the bit diaganilly above number 5 (that the fork goes onto) i got the "l" shaped thingy that it bolts onto, is it just another bolt in the other hole? thanks.
|
|
|
Post by charliezminiz on Dec 14, 2009 17:30:36 GMT
to hold it on to the gearbox?
|
|
|
Post by Admin/Founder 2 on Dec 14, 2009 17:53:31 GMT
Not too sure Im sure somebody here will know Just a case of waiting for the right person with the knowledge to come online And theres a good few of them on here
|
|
|
Post by julian0987 on Dec 24, 2009 13:07:37 GMT
see if you find this useful it's a page copied out of a haynes manual
|
|
|
Post by mra-minis on Dec 27, 2009 20:31:57 GMT
If by the "I" shaped part you mean the selector shaft or rod... that goes from right to left.... and has a locator pin on the quadrant thet fits in to it..... although I am a little unsure of what else you could mean
|
|