|
|
Post by coxy240 on Apr 28, 2014 10:51:27 GMT
I have completely removed the front subfram and im in the process of cleaning repainting. I need to replace most of the bushes as there worn/split on not there.
I know im only leaving the standard 998 auto in but i wanted to upgrade bushes where i can.
I have been reading around different sites with different opinions on what should and shouldn’t be upgraded.
Any advise or ideas on what should be used.
Thanks people
|
|
|
|
Post by kalkat on Apr 28, 2014 13:50:15 GMT
It depends what you want from your car......
One thing I have found is that replacing the rubber subframe mounts with polymounts is useful. Noise is slightly increased but offset by the more positive location of the subframe. If you recall, the Mk1/2 Minis had solid subbie mounts.
If you are going to do suspension mods or use adjustable components, you will need to look a little more carefully.
Emma
|
|
|
|
Post by kalkat on Apr 28, 2014 18:43:27 GMT
|
|
|
|
Post by coxy240 on Apr 29, 2014 8:06:10 GMT
Thanks. Given me food for thought. Think I'll opt for a mixed poly and standard.
Sent from my LT30p using Tapatalk
|
|
|
|
Post by coxy240 on Apr 30, 2014 12:09:49 GMT
Opinion on who is the better place to buy???
Sent from my LT30p using Tapatalk
|
|
|
|
Post by kalkat on Apr 30, 2014 12:43:07 GMT
Go for someone who has a respected name. Some poly jobbies are made from....weell a material that isn't right.
I believe I got mine from Minispares but it was a long time ago now. I shall be rebushing Vanessa soon (MAJOR overhaul time) and will probably use them, I am going to be using adjustable suspension so some changes/upgrades will be needed.
One thing I would say though, is DO NOT polybush the rear subframe. Even the rally bods don't do this -they stopped wheen they kept breaking things.
Emma
|
|
|
|
Post by coxy240 on Apr 30, 2014 16:46:30 GMT
Just as I thought. Almost ready to start ordering parts. All the subframe and engine mounts are shot. Glad I dropped the subframe now. Adjustable. Suspension!!! Not looking to change that much maybew later in the year. Haven't got to the rear yet but will stay away from poly. Thanks for the tip.
Sent from my LT30p using Tapatalk
|
|
|
|
Post by coxy240 on May 5, 2014 18:23:42 GMT
Has any one used flo flex bushes.
Sent from my LT30p using Tapatalk
|
|
