|
|
Post by falcone on May 3, 2016 14:06:52 GMT
Hello first time poster here. I have a ,92 Rover Auto 1275cc Fuel Injection and am planning on doing a centre binnacle conversion, removing the stock 3 gauge speedo and replacing it with the centre speedo. My question is, since my car is an Auto is this still possible? I have only seen it done on manuals.
Thanks!
|
|
|
|
Post by minigman on May 3, 2016 16:11:37 GMT
Can be done but be prepared to have the speedo calibrated. I did this before and struggled to find a speedo with the correct turns per mile due to the rarer final drive ratio. I think I ended up with one from a Morris minor, which was about 2% out. Old car so unable to check for you now.
|
|
|
|
Post by limby2000 on May 3, 2016 18:00:52 GMT
Anythings possible and has been done by someone before, if your speedo still needs calibrating, there,s a firm called speedy cables that recalibrates your speedo to match.
|
|
|
|
Post by falcone on May 3, 2016 21:26:09 GMT
Thanks!
|
|
|
|
Post by 69hcode on May 4, 2016 2:27:37 GMT
Falcone,
Where do you hail from?
|
|
|
|
Post by falcone on May 4, 2016 21:19:31 GMT
Falcone, Where do you hail from? Winnipeg, Canada! |
|
|
|
Post by notamini on May 6, 2016 15:47:24 GMT
Just came online and found this. I'm presently listening to 92 Citi FM! Winnipeg.
I'm in Guelph, Ontario.
Mark
|
|
