|
|
Post by richard1 on Aug 28, 2016 23:12:56 GMT
I found a good place to drill and tap for the oil temperature so I don't have to depend on the idiot light on the dash. Drilled and tapped the front panel.   |
|
|
|
Post by 69hcode on Aug 29, 2016 0:26:30 GMT
What oil temperature should we begin to worry it gets too hot? A few weeks ago my coolant got to 220*F (about 10* C) and my trans case was reading 176*F (about 80*C). This was taken with a laser temp gun at the thermostat on the head and the front of the trans case.
|
|
|
|
Post by limby2000 on Aug 29, 2016 6:42:27 GMT
Nice one Richard, might have to nick that idea while my front panel is off. Have you a closer pic, also what brand of gauge did you use.
|
|
|
|
Post by richard1 on Sept 23, 2016 23:28:29 GMT
My gauges seem to be no longer available. Maybe a one-time brand "Nitro". somewhere around $5 to $10 each, oil temp, oil pressure, tachometer. One wire to ground, one to the gauge.  Here is a pick from the inside.  |
|
|
|
Post by limby2000 on Sept 24, 2016 10:54:14 GMT
Yep, me thinks i will be copying that one cheers.
|
|
