|
Post by hennasxi on Feb 24, 2018 17:07:31 GMT
Anyone have a spare oil filter header unit, the right handled part that goes between the gearbox and oil fi lter canister? Mine has a crack in it and won't hold pressure so oil is pouring out. Part is obsolete it appears. Part number I think is 37H1480
|
|
|
Post by 69hcode on Feb 27, 2018 0:25:42 GMT
I've got one off my 1981 998. Not sure of the part number but I'm in the states.
|
|
|
Post by firept on Feb 27, 2018 22:24:39 GMT
I'll have a look and see, cant remember if I have one or not its in the roof of the garage ( B' cold up there!) if i've got one where are you based? PM me if you prefer. I take it you have eliminated the canister seal at the base as they can distort, it will leak for a past time if its not flat and the top end often gets distorted by over ambitious tightening of the bolt, both can be corrected if its not too far gone.
|
|