ken100
Junior Member
Posts: 13
|
Post by ken100 on May 1, 2020 17:38:18 GMT
Looking for a oil feed pipe for a 998cc automatic
|
|
|
Post by jockduck on May 2, 2020 11:48:18 GMT
Yeah, which one? Jock
|
|
ken100
Junior Member
Posts: 13
|
Post by ken100 on May 2, 2020 17:26:33 GMT
Sorry can’t attach a photo but it’s the one that is at the front of the block that attaches above the oil pressure gauge then down near the filter bowl. Thought I could use the one from a 998 manual but the end near the filter bowl sits to far away from the block
|
|
|
Post by jockduck on May 3, 2020 11:25:20 GMT
Hi, I think I may have one, it will be off an early motor, I shall have a look tomorrow and photo. where in the world are you? Jock
|
|
ken100
Junior Member
Posts: 13
|
Post by ken100 on May 3, 2020 11:47:01 GMT
Leicester, UK
|
|
|
Post by jockduck on May 4, 2020 11:22:15 GMT
OK, here is a couple of photos, I would be interested in selling the pipe but I would imagine there would be one available to you closer than Australia! Jock
|
|
ken100
Junior Member
Posts: 13
|
Post by ken100 on May 4, 2020 13:32:36 GMT
Thank you for your time looking jock it is much appreciated. Yes I guess postage alone would be high so hoping to find one closer to home but there hard to find I think. My friend has 1275 auto with an oil cooler on it which he is prepared to swap as I have a 1275 feed pipe he can use but unsure about putting an oil cooler on an auto as there’s mixed opinions on the forum.
|
|
|
Post by mra-minis on Sept 29, 2020 15:17:34 GMT
Thank you for your time looking jock it is much appreciated. Yes I guess postage alone would be high so hoping to find one closer to home but there hard to find I think. My friend has 1275 auto with an oil cooler on it which he is prepared to swap as I have a 1275 feed pipe he can use but unsure about putting an oil cooler on an auto as there’s mixed opinions on the forum. If you oil is getting too hot then fit an oil cooler, you could also fit an oil thermostat bypass and then all is well I have these pipes in stock for 998 and 1275 in bother early and or late, ie short pipe nipple or the much better longer type.
|
|