|
|
Post by miniyard on Feb 5, 2021 14:11:29 GMT
Can a small bore block be fitted to a box originally fitted to a large bore block and vice versa? I know there are gear change cable connection changes at the box end, and oil transfer pipe differences.
|
|
|
|
Post by limby2000 on Feb 5, 2021 15:18:27 GMT
Yes you can, i have a later 1275 box fitted to my small bore (original 998), you will have issue,s where the 1275 box has the inhibitor on front of box, so you will need the matching shifter.
|
|
|
|
Post by limby2000 on Feb 5, 2021 15:24:28 GMT
I guess, if you did,nt want the "park" function you could still use the "T" shifter, with the 998 gearbox front panel.
|
|
|
|
Post by notamini on Feb 5, 2021 16:49:09 GMT
I like the old 'T' shifter with 1, 2, 3, 4, D because I sometimes like to shift into 4 and keep it from downshifting. Also good for boxes that have flaring until you can fix it because you can manually shift from 3 to 4 when you have reached a higher speed.
|
|
|
|
Post by miniyard on Feb 5, 2021 19:11:12 GMT
I guess, if you did,nt want the "park" function you could still use the "T" shifter, with the 998 gearbox front panel. Yes already doing that with the 1275 I have in at the moment |
|
