|
Post by staycool on Apr 14, 2021 1:18:13 GMT
Hi all, I have done a gearbox rebuilding for my Mini SPI Japanese import automatic transmission, an issue just came over after i run it up. The gear is not changing automatically when its on D mode, any help
|
|
|
Post by jockduck on Apr 14, 2021 11:00:00 GMT
Hi and welcome, Does the box change when you move the lever manually? assuming that it does then the problem is with the speed governor, the weights can stick on the shaft or possibly the governor control lever is incorrectly assembled. any chance the drive to the governor is not working? Jock
|
|
|
Post by notamini on Apr 14, 2021 17:08:41 GMT
There have been many postings here on the reassembly of the governor linkage being installed wrong. Usually it is set 180 degrees out or backwards whichever way you want to say it. That's where I would start.
|
|
|
Post by limby2000 on Apr 14, 2021 17:12:10 GMT
Yep, it sounds like the governor arm is,nt clipped into the valve block shuttle, if its selecting manually correctly, its governor related.
|
|