|
|
Post by staycool on Apr 14, 2021 16:56:27 GMT
Hello,
I have done rebuild in gearbox . Engine running fine but when i select Drive gear stock in 3rd. When i drive the can manual it gose to 1st, 2nd and 3rd normally
It drive 1,2,3, without 4 ,and when select D its stock on 3rd
thank you for your input
|
|
|
|
Post by notamini on Apr 14, 2021 17:12:41 GMT
Is your shifter 1,2,3,D or 1,2,3,4,D? Can you select neutral and reverse? Sounds to me like it might just be shifter cable adjustment.
|
|
|
|
Post by staycool on Apr 14, 2021 18:23:24 GMT
Is your shifter 1,2,3,D or 1,2,3,4,D? Can you select neutral and reverse? Sounds to me like it might just be shifter cable adjustment. Yes i can select neutral and reverse as my shifter is 1, 2, 3, D and when i select D its stock on 3rd level |
|
|
|
Post by mra-minis on Jul 23, 2021 9:43:25 GMT
Is your shifter 1,2,3,D or 1,2,3,4,D? Can you select neutral and reverse? Sounds to me like it might just be shifter cable adjustment. Yes i can select neutral and reverse as my shifter is 1, 2, 3, D and when i select D its stock on 3rd level I can be contacted on martin@kmprecisionengineering.com Maybe your kickdown linkage has been fitted incorrectly |
|
|
|
Post by notamini on Jul 23, 2021 14:49:50 GMT
Often times that kickdown link is put in backwards. There are postings on this site showing the correct positioning.
|
|
