|
Post by russellsworth on Jul 3, 2023 18:55:38 GMT
Hi all I'm overhauling my apII auto transmission and while cleaning up oil from below valve body I came across this this piece of metal. Not sure if I knocked it off from somewhere or if it's part of the valve body. Any help would be much appreciated!
|
|
|
Post by jockduck on Jul 4, 2023 11:44:27 GMT
off the top of my head I would say its from the valve block, I checked my manuals but nothing familiar turned up, if I remember I'll open up my spare valve block tomorrow. Jock
|
|
|
Post by mra-minis on Jul 4, 2023 16:32:09 GMT
Hi all I'm overhauling my apII auto transmission and while cleaning up oil from below valve body I came across this this piece of metal. Not sure if I knocked it off from somewhere or if it's part of the valve body. Any help would be much appreciated! View AttachmentI can be contacted on sales@ap2.world Yes its usually fitted in the valve body, if you took the top off the VB and then the valve block off the valve body then yes, it usually falls in the grooves in the bottom og the case, if however you didn't take the valve body apart then it's either a spare one keep it safe, or somebody else has taken it apart and its fallen out at that stage, be wary if it's the latter as you don't know what other damage has been caused with other similar parts/..
|
|
|
Post by mra-minis on Jul 4, 2023 16:36:08 GMT
off the top of my head I would say its from the valve block, I checked my manuals but nothing familiar turned up, if I remember I'll open up my spare valve block tomorrow. Jock I can be contacted on sales@ap2.world It's not fitted to earlier models
|
|