|
|
Post by (minisniper) on Apr 7, 2010 19:38:34 GMT
Hiya guys. I'm having a problem with my right indicator well intermittent problem with my right indicator. Sometimes it will work fine and then sometimes it will just stop working or if I keep the indicator stalk pushed up it will work. Any ideas what it could be. Lea  |
|
|
|
Post by Admin/Founder 2 on Apr 7, 2010 19:59:49 GMT
The Indicator could be a faulty Stalk or a fautly Relay or Possibly the Relay isnt pushed into its socket fully? or Even a Faulty inicator bulb socket? Sometimes if you wiggle and reposition them they start working again Properly  Or it could Possibly be dirty or rusty Bulb socket? Best have a looky at all the ideas ive mentioned and try them all |
|
|
|
Post by notamini on Apr 8, 2010 19:09:19 GMT
If holding the stock up higher than rest makes it work, the problem is likely in the stock.  Check that the wires are well connected. If they are good, there might be dirt or oxidation on the internal contacts. Try spraying with electrical contact cleaner or even WD40. The latter may not work until most of it has dissipated because it is sort of filmy.  If this fails, you will have to tear it down and manually clean it.  Or inspect it for burn or wear spots. |
|
