|
|
Post by gksmini on Aug 10, 2010 19:46:16 GMT
|
|
|
|
Post by shoutforjoy on Aug 10, 2010 20:03:14 GMT
Hi Graeme That's great news.  I bet you've been driving around with a grin from ear to ear! Paul |
|
|
|
Post by (minisniper) on Aug 10, 2010 21:09:32 GMT
Hi Graeme Congratulations on your new MOT glad to hear it passed. Enjoy the next 12 months of driving!!!  |
|
|
|
Post by gksmini on Aug 10, 2010 21:10:40 GMT
Hi Paul
yes I'm over the moon, its only taken me 4 years to finish project.
I'm still looking for CD I saved progress pictures on so I can post them.
Do you know how difficult torque convertor removal from an engine on the bench is ?
Graeme
|
|
|
|
Post by shoutforjoy on Aug 10, 2010 22:15:50 GMT
Hi Graeme
I've never taken a torque convertor out so I cant say how difficult it is.
It's in the Haynes manual (section 2a-11 detailed as an engine-in procedure) - shown as medium difficulty but needing some specialist tools. I know that MRA Minis (www.mra-minis.co.uk) sell these.
There's also write-up in the "how to" section of this forum with loads of pictures. I think I would start here.
If you have any specific problems post them on the techie pages and I'm sure someone more knowledgable than me will help you out.
Hope this helps.
Paul
|
|
|
|
Post by clambod on Aug 11, 2010 6:24:36 GMT
I'm glad it sailed through the MOT
|
|
;D 
