|
|
Post by mra-minis on Nov 5, 2020 19:09:55 GMT
I can be contacted on martin@kmprecisionengineering.com This is addressed to all members, please feedback to us with any points of view of how the new staff are running your forum ! We are all enthusiasts and are trying to keep it running for all of us, not just for Mini but for any vehicle that uses an AP 1 or AP2 transmission. To recap, your feedback and suggestions are not only welcome but also necessary, its your forum lets run it the way we want it run if you want a new board item just let us know, if you want to be a staff member then lets discuss this too. We have a new way forward lets make the most of it. Thanks for reading  Regards Martin |
|
|
|
Post by limby2000 on Nov 6, 2020 12:23:24 GMT
The futures looking bright already!
|
|
|
|
Post by firept on Nov 6, 2020 23:44:52 GMT
Hi Martin I've responded to your email.
yes its nice to see some new life coming back to the forum and riddance of the vape attacks.
Keep up the good work.
|
|
|
|
Post by mra-minis on Nov 7, 2020 9:54:22 GMT
Hi Martin I've responded to your email. yes its nice to see some new life coming back to the forum and riddance of the vape attacks. Keep up the good work. I can be contacted on martin@kmprecisionengineering.com Thanks for your support. |
|
|
|
Post by clifford on Nov 7, 2020 12:00:36 GMT
This is truly excellent news! I'm probably about half way through my re-build project, the aim being to get my Nomad on the road for next year. I would have changed to a manual box right at the outset if it hadn't been for all the time spent gleaning knowledge from past posts on this forum and the reassurance that help was available if needed. I haven't even got to the stage of trying to run the engine yet, so I envisage at least a few teething problems when the time comes. Such a relief to know the board is in safe hands. |
|
|
|
Post by mra-minis on Nov 7, 2020 17:05:45 GMT
This is truly excellent news! I'm probably about half way through my re-build project, the aim being to get my Nomad on the road for next year. I would have changed to a manual box right at the outset if it hadn't been for all the time spent gleaning knowledge from past posts on this forum and the reassurance that help was available if needed. I haven't even got to the stage of trying to run the engine yet, so I envisage at least a few teething problems when the time comes. Such a relief to know the board is in safe hands. I can be contacted on martin@kmprecisionengineering.com Thanks Clifford, Good to see that you are willing to add your project to the project area Nomads are rare these days, Automatic variants probably more so ! Cliffords Nomad can be found here>>>> To take a look at Cliffords Nomad (click here) |
|
