|
Post by (minisniper) on Oct 23, 2009 9:36:20 GMT
I haven't actually done anything on Molly but I am cleaning her new Rover seats ready to go in after I went and bought bucket seats and don't like them
|
|
|
Post by Admin/Founder 2 on Oct 27, 2009 9:29:18 GMT
Well i havnt done anything as such though yesterday i went out and bought Boris a nice new Oil Filter and 6 litres of Valvoline VR1 20W50 (ie/5 litres plus 1 litre top up) Look out for the "How To" on his Oil Change comming soon ;D Huggz Jodie
|
|
|
Post by (minisniper) on Oct 30, 2009 20:40:22 GMT
I have given Molly a good wash and polish today as I haven't for a few weeks so now she is all shiney and her chrome is all twinkly!! ;D ;D
|
|
|
Post by Admin/Founder 2 on Oct 31, 2009 15:04:34 GMT
I haven't actually done anything on Molly but I am cleaning her new Rover seats ready to go in after I went and bought bucket seats and don't like them Dont forget we want to see some before and after photos of the interior with old seats and the new ones if you have photos?
|
|
|
Post by nilejackson on Nov 1, 2009 0:19:31 GMT
My mini is about 100 miles away from being because its being serviced by a friend where i originate from. I feel sick, i wont be with her for another week or so :-(
|
|
|
Post by asahartz on Nov 1, 2009 13:35:07 GMT
I'm just off out to the garage to spray the new front end I've fitted on my project Sky. See yas later.
|
|
|
Post by nilejackson on Nov 1, 2009 18:01:09 GMT
just insured her ready on the 14th. The day after my Birthday could not think of a better day to start driving her! ( apart from NOW ) lol
|
|
|
Post by (minisniper) on Nov 1, 2009 19:54:05 GMT
I haven't done anything to Molly today but I did take her out yesterday for a run down the shops.
|
|
|
Post by mrslaphead on Nov 1, 2009 20:08:44 GMT
Nothing today, but picked him up on Friday from having a new radius arm and 4 wheel alignment set up. The back end has been trying to overtake the front end since a mazda 6series ran into the back of me earlier this year. Had a very enjoyable drive home, the long way of course . Oh yes I also put a new set of 10" alloys on.
|
|
|
Post by Admin/Founder 2 on Nov 4, 2009 18:52:52 GMT
Filled Boris with nice new Oil that doesnt appear to like being Imprisoned As it keeps trying to escape
|
|
|
Post by projectminichris on Nov 4, 2009 18:56:31 GMT
thats a blow >_< (was going to say something else but remembered 'family forum ' ) the best chances are that it is the ring you mentioned, poor boris! hope you get him sorted soon
|
|
|
Post by (minisniper) on Nov 6, 2009 13:13:08 GMT
I went out to fit the new door cards, put everything in place tools etc and then the heavens opened So everything is back in the garage now.
|
|
|
Post by (minisniper) on Nov 8, 2009 13:57:27 GMT
I have fiddled with my heater to try and get the damper in the correct position and get more air blowing on to the screen. Well I have a little more air blowing on the screen but now I can't move the lever to the OFF position but I can live with that for now!!
|
|
|
Post by asahartz on Nov 8, 2009 14:20:15 GMT
Just painted the front end on Skye. Waiting for it to harden so's I can put another coat on.
|
|
|
Post by (minisniper) on Nov 12, 2009 21:27:58 GMT
I couldn't do anything today as the weather was horrible but I did drive to town
|
|
|
Post by asahartz on Nov 15, 2009 18:22:23 GMT
Today I've spent most of my time rubbing out the runs from last week's paint coat And putting a fresh coat on top. It's not perfect, but it will have to do for now; son Adam has his test in two weeks and I'll need another car on the road!
|
|
|
Post by Holly on Nov 15, 2009 18:29:07 GMT
we had to fix one of Michael's Minis today as one of the front arches came off and started flapping during our trip to the Classic Motor Show yesterday ... we also discovered one of the front subframe mounts was gone too Got it all sorted now though
|
|
dan
Full Member
Posts: 72
|
Post by dan on Nov 17, 2009 11:08:21 GMT
spent 200£ on bits and pieces for my mini today, cars got its test on the 5th of dec- failed miserably in april so did the balljoints, couple of lil holes in the sill, new drums on the way and the biggie-rear alignment out by 19m/km!!!!!
|
|
sidney
Senior Member
Posts: 18
|
Post by sidney on Nov 25, 2009 22:04:43 GMT
Just finished welding up some over engineered spot lamp brackets for a set of big-ass rally style cibie spots, and now finishing prepping a rather nice stage 3 head thats going on next week sometime. Happy days!!
|
|
|
Post by (minisniper) on Nov 26, 2009 17:24:04 GMT
Unfortunately I have done anything on Molly today or the last few days but have been looking on the internet for some new bits for her but at the moment she is covered in leaves
|
|
|
Post by (minisniper) on Dec 3, 2009 19:38:22 GMT
I drove to the shop yesterday and picked my lad up as well, so I haven't actually done anything on Molly butI have driven her!!!!
|
|
|
Post by dustydog on Dec 3, 2009 22:43:19 GMT
didn't do anything today but I did take it for an mot on tuesday. Unfortunately it failed on 3 bits of welding! But it was the first time I've driven it properly and it was great fun. Now I just need to sort out that welding somehow.
|
|
bigsniper
Senior Member
Don't always act on what you think or feel
Posts: 15
|
Post by bigsniper on Dec 3, 2009 22:45:53 GMT
didn't do anything today but I did take it for an mot on tuesday. Unfortunately it failed on 3 bits of welding! But it was the first time I've driven it properly and it was great fun. Now I just need to sort out that welding somehow. Sorry to hear about the welding, drop Pink Shifty a PM as he is our welding guru and I'm sure he will be able to advise or help you.
|
|
|
Post by 76antiquegold on Dec 4, 2009 21:10:09 GMT
I`ve struggled for 2 hours in the rain under my sprite to try and remove a seized and sheard manifold/downpipe stud!!! it`s still there, i`m cold, wet and fed up!!!
|
|
|
Post by niceboy1275 on Dec 10, 2009 10:07:29 GMT
I washed/polished our 850, 1 clubman and the LS1275 in preparation for this weekends "Mini Experience Grand Day Out". Then it started to pour down with rain. So I gave up
|
|
|
Post by dustydog on Dec 11, 2009 19:15:21 GMT
nothing today, but did all the prep work yesterday so pink shifty can come and do all the welding next week. I can't wait so I can take it back for it's mot and then start using it at last.
|
|
|
Post by (minisniper) on Dec 12, 2009 20:17:05 GMT
|
|
|
Post by Holly on Dec 12, 2009 20:41:10 GMT
I haven't done any work on my Minis today, but I did start to make some Xmas Deccys to go on Merri at the Xmas Mini Show at Stoneleigh next weekend
|
|
|
Post by mollymoke on Dec 30, 2009 23:42:36 GMT
I fitted an oil cooler to Mollymoke (I had it from another car) but one of the manual engine pipes was all wrong, different thread on one end, elbow on the other where I wanted straight... 2 trips to a local 'hose shop' all fixed and working well now, fresh oil and filter, nice clean cool engine... Guess this sounds funny as UK is suffering from the cold right now
|
|
|
Post by Holly on Dec 31, 2009 11:33:02 GMT
I will hopefully be changing Merri's oil filter today, fingers crossed it all goes ok
|
|